The basic principle of CNC pipe bending machine
CNC pipe bending machine is a kind of equipment that uses numerical control technology to bend metal pipes. Through computer control, it can realize the automatic bending of the pipe, which greatly improves the production efficiency and accuracy. The core components of CNC pipe bending machine include: bending head, support roll, bending arm, etc. During the bending process, the pipe is fixed on the support roll, the bending head drives the pipe to bend and form, and the bending arm is responsible for controlling the bending Angle. The whole process is precisely controlled by the computer to ensure the consistency and stability of the product.
How to properly install and debug CNC pipe bending machine
Proper installation and commissioning is a prerequisite for using CNC pipe bending machines. according to the equipment instructions, through the control panel to debug the parameters, including bending speed, bending Angle, etc. After the debugging is completed, you can test the bend, check the product quality, and further fine-tune the parameters if necessary. Only after careful installation and debugging,CNC pipe bending machine can play the maximum performance.
How to choose the right pipe
CNC pipe bending machines can process pipes of various materials, but not all pipes are suitable. When choosing pipes, the following factors need to be considered:
Pipe material:
common carbon steel pipe, stainless steel pipe, aluminum alloy pipe, etc., each material hardness and toughness are different, need to be selected according to the specific processing requirements.
Pipe size:
The outside diameter, wall thickness and length of the pipe will affect the bending effect, and the pipe that is too large or too small may not be able to successfully bend.
Pipe status:
The pipe should choose high-quality raw materials with uniform texture, no burrs and no deformation, and avoid using pipes that have been damaged.
Pipe pretreatment: Sometimes it is necessary to deburring, cleaning and other pretreatment of the pipe to ensure that the subsequent processing is smooth.
Only by selecting the right pipe,CNC pipe bending machine can maximize production efficiency and product quality.How to reasonably program control CNC pipe bending machine
The programming control of CNC pipe bending machine is the key. Programmers need to set parameters such as bending Angle, bending radius and bending speed reasonably according to product design requirements. At the same time, factors such as pipe characteristics and process requirements should be considered to ensure that the programming results can truly guide the equipment to successfully complete the pipe bending operation.
During the programming process, it is necessary to debug repeatedly, check the bending effect, and fine-tune parameters if necessary. Only after repeated optimization, can we get a set of effective procedures. In addition, the programmer must master a certain amount of mathematical knowledge, can calculate reasonable bending parameters, improve the bending accuracy.
How to carry out daily maintenance and maintenance
As a precision equipment, CNC pipe bending machines need regular maintenance and maintenance to ensure their long-term stable operation. The details include:
Regularly check whether the connection of each component is firm and whether the lubrication is good.
Clean the surface and internal parts of the equipment, and remove accumulated metal chips and impurities in time.
Check and replace wearing parts, such as elbow, support roll, etc.
Carry out maintenance on time, such as changing lubricating oil.
Take good safety protection to ensure the personal safety of operators.
