Industry introduction
Pipe cutting is the necessary process of pipe application, the existing pipe cutting equipment, generally using saw machine, cutter and other ways of sawing pipe, these processing methods of cutting accuracy is low, cutting surface is rough, the end surface is easy to form burrs, affecting the quality of subsequent processing. In addition, the above processing method has harsh requirements on the wall thickness of the pipe and is not suitable for cutting the pipe that is too thin or too thick. The existing process is usually chamfered after the pipe cutting, and the process is complicated.
Principle of automatic pipe cutting machine
Automatic pipe cutting machine can automatically clip, feed, feed, size setting, fixed number stop and work measurement and other functions. The main circuit of the machine adopts PLC programmable logic controller.
Automatic feeding, clamping, cutting system, accurate and fast feeding.
The counter can set the number of cutting, and automatically stop after cutting. There is no need for manual operation, higher mechatronics, and even one person can operate multiple units, reducing employees.
The total counter can count a day’s work record. The servo pipe cutting machine is used to ensure the accuracy of the length of the pipe is within plus or minus 0.05mm (the error is mainly generated on the steel pipe and the tool), and the notch is glossy without burring.
Advantages and characteristics
Fast speed, high precision
The use of motion control PLC improves the speed and efficiency of the whole machine.
Stable performance, safe and reliable
The stability of the whole machine is improved by using the motion control PLC. At the same time, with the advantages PLC in logical action processing, strengthen the protection between actions, improve a variety of alarms, and make the system more safe and reliable.
Simple operation and easy maintenance
In practical application, the system is perfect, the operation is more convenient, and the interface is more friendly. Through the terminal customer operation application, the system has been more perfect processing, making the interface more concise, some operations are placed in the system to complete. The operator only needs to learn through the manual to master. At the same time, the use of modular programming, but also in the system to do a large number of alarm and monitoring procedures, not only increase the stability of the system, but also make the system maintenance more convenient.
