We all know that after a period of use of the pipe cutting machine, its internal parts will appear a certain degree of wear.if not timely maintenance will reduce the service life of the equipment, and in the process of work will also affect the process of work. However, if it can be well protected, it will reduce the occurrence of this phenomenon.
Pipe cutting machine causes wear:
First, in our practical application, there are many relevant personnel operating the pipe cutting machine do not understand the operating procedures and mechanical performance of the machine, which is likely to be misoperated in use, resulting in damage to the pipe cutting machine.
Second, we must clearly know what the maximum load of our mechanical equipment is, so as to prevent the damage of the machinery due to excessive load in use.
Third, the load of the pipe cutting machine must be evenly accelerated, so that the machinery is changed under a relatively stable load.
Fourth, the wear cause of the pipe cutting machine is because the protection work has not been done, so that the oil spill of the bending hoop parts has formed a huge impact on the original operating environment, resulting in increased wear during operation, and the running frequency of the parts has been increasing, and the operation failure has been caused by various factors.
Daily maintenance of pipe cutting machine:
1. Carefully inspect the parts of the machine before starting, and check whether the connection bolts are tight and reliable. Whether there is a leak in the trachea. Periodically check whether the bolts are loose with a wrench.
2. The parts that need lubrication must be filled with lubricating oil regularly.
3. Replace the cutter or repair the machine, please cut off the power supply and hang the repair plate.
4. Clean up the mechanical hygiene in time and keep the equipment clean.
5. Please cut off the power and turn off the air supply after work.
